Best Value Vacs I-502 ASME Certified Closed Loop Extractor Systems Information

December 05, 2015

These units are an ASME Section 8 Division 2 Certified I-502 Compliant Extractor system.  All units have been individually built and tested here in Lombard, Illinois USA by Helander Metal Spinning Company -- renowned for their 70+ years of quality manufacturing experience.

This is a certified boiler pressure apparatus tested for it's intended purpose that also includes certified welds.

 

I-502 ASME Certified 0.5lb 316L CLE w/ Swagelok Ball Valves -- Specifications and What's Included:

  • Specifications:
    • Meets Strict ASME Boiler and Pressure Vessel Code
    • Major Components made of 316L (Laboratory Grade) Stainless Steel
    • Pressure Blow OFF Valve
    • Compound Gauge from -30Hg-160PSI
    • 3/4" Thick Lid and Base
    • System Rated to 150 PSI @ 160F MAWP and -20F @ 150 PSI MDMT
    • Multiple Port Connections for 1/4" 316 Stainless SAE 37 Degree Flares
    • Can Hold up to a 1/2lbs of Material
    • Weight: 24lbs
    • Ultimate Vacuum as low as 10 Microns
    • Base Unit Maximum Capacity: 155 Cubic Inches (2.53 Liters)
    • Max Vacuum -29.9Hg
  • What's Included:
    • Complete Reclamation Extractor w/ Solvent Tank (not pictured)
    • 6" x 6" Stainless Steel Solvent Tank
    • (x1) 60" High Pressure PTFE Braided Stainless Steel Hose
    • (x3) 1.5" x 12" 316L Material Tubes
    • (x3) 1.5" Tri-Clamp Viton Gaskets
    • (x1) 6" Tri-Clamp Viton Gasket
    • (x1) 1.5" Tri-Clamp 100 Mesh Viton Screen Gasket
    • (x1) Can Tap Tool
    • Full Set of EXTRA gaskets for the system is included 
  • General and Upgrade Info:
    • All tubes are modular allowing the user to perform small test runs or to process larger quantities.  This versatility will help facilitate success.
    • Multiple upgrade kits do not function in tandem, inquire for assistance
    • Ball Valves are 316 Stainless Steel
    • Stage 1 and 2 Dewaxing upgrade kits contain 304 Stainless Steel

 

I-502 ASME Certified 2lb 316L CLE w/ Swagelok Ball Valves -- Specifications and What's Included:

  • Specifications:
    • Meets Strict ASME Boiler and Pressure Vessel Code
    • Major Components made of 316L (Laboratory Grade) Stainless Steel
    • Pressure Blow OFF Valve
    • Compound Gauge from -30Hg-160PSI
    • 3/4" Thick Lid and Base
    • System Rated to 150 PSI @ 160F MAWP and -20F @ 150 PSI MDMT
    • Multiple Port Connections for 1/4" 316 Stainless SAE 37 Degree Flares
    • Can Hold up to a 2lbs of Material
    • Weight: 65lbs
    • Ultimate Vacuum as low as 10 Microns
    • Base Unit Maximum Capacity: 750 Cubic Inches (12.29 Liters)
    • Max Vacuum -29.9Hg
  • What's Included:
    • Complete Reclamation Extractor w/ Solvent Tank(not pictured)
    • 30LB LP Recovery Tank for Solvent
    • (x1) 72" High Pressure PTFE Braided Stainless Steel Hose
    • (x2) 3" x 18" 316L Material Tubes
    • (x2) 3" x 1.5" Conical Tri-Clamp Reducers
    • (x3) 1.5" Tri-Clamp Viton Gaskets
    • (x1) 10" Tri-Clamp Viton Gasket
    • (x1) 1.5" Tri-Clamp 100 Mesh Viton Screen Gasket
    • (x1) Can Tap Tool
    • Full Set of EXTRA gaskets for the system is Included
  • General and Upgrade Info:
    • All tubes are modular allowing the user to perform small test runs or to process larger quantities.  This versatility will help facilitate success.
    • Multiple upgrade kits do not function in tandem, inquire for assistance
    • Ball Valves are 316 Stainless Steel
    • Stage 1 and 2 Dewaxing upgrade kits contain 304 Stainless Steel

 

WARRANTY INFORMATION:

  • Have an issue?  Call Tech Support @ 1-888-493-2922.
  • Extractors have a 1 Year Warranty (except for gaskets and seals).
  • Customers will have 3 Business Days to inspect orders after delivery for omissions/errors.
  • Beyond 3 Business Days, any missing items will not be replaced/shipped for free -- NO EXCEPTIONS.