News

Premium Detox - 7 Day Cleansing System
May 19, 2019

Premium Detox 7-Day Herbal Cleansing System Information

Daily 7-Day Regimen 

ONE day before you begin your 7 day cleanse:

Take all 4 capsules from the Jumpstart Dietary Supplement with 24oz of water.  For your comfort, wait 15 minutes and then drink an additional 12-24oz of water.  Try to not eat any large meals while using this product, as a full stomach will slow down the efficiency of your cleanse!  Also, be sure to urinate frequently as this helps move toxins out from your body.

Read more

April 13, 2016

Definite Detox 1oz Cleansing Liquid w/ 4 Capsules Information

Instructions:

  1. First drink the 1oz liquid concentrate and follow up by swallowing the 4 cleansing capsules.  Easy!
  2. Because this product in concentrated, you will now have to drink 32oz of water at a comfortable but consistent pace.  Not too slow and not too fast!
  3. Wait 15 minutes before drinking an additional 16oz of water to complete the process.

Read more

Plenty Vaporizer by Storz & Bickel
April 11, 2016

Plenty Vaporizer Information

Tips and Tricks:

  • The drier and more evenly ground herb used, the better!
  • It's generally a good idea to start at a lower temperature before scaling incrementally upwards.  Patience is a virtue when finding that perfect spot!
  • Stir your herb chamber halfway through a session for optimal flavour and vapor production throughout.
  • Never leave the Plenty vaporizer on when not in use.  That's just safety 101!

Read more

April 11, 2016

Herbalizer Vaporizer Information

Getting Started:

  1. After plugging in your Herbalizer vaporizer, lift the lid to turn it on.
  2. Press the VAPORTHERAPY button to begin heating.
  3. Half twist the bowl covering and fill the chamber half way with fine, evenly ground herb.
  4. Set the temperature using the +/- buttons on the control bar.

Read more

Digital Volcano Vaporizer Information
April 08, 2016

Digital Volcano Vaporizer Information

Getting Started:

  1. To turn on the heater, switch on the HEAT button.  The set/actual temperature reading will light up at the same time.
  2. The yellow CONTROL light will then turn on to indicate that the unit is heating up.
  3. The upper red display shows the actual temperature whereas the green display shows your last entered heat setting.  You may adjust the temperature with the green +/- buttons as you please.

Read more

April 08, 2016

Analog Volcano Vaporizer Information

Getting Started:

  1. Switch the HEAT switch on to begin the Volcano vaporizer's heating process.  The yellow-coloured CONTROL light will turn on to indicate the unit is heating up.
  2. You can use the analog temperature control to adjust the level of heat in increments as you go.
  3. Once the yellow CONTROL light turns off, the heating process is complete and you're ready to affix either your Solid Valve or your Easy Valve kit to the Volcano's hot air outlet.

Read more

Extreme Q Digital Vaporizer 4.0
April 06, 2016

Extreme Q 4.0 Vaporizer Information

Getting Started:

  1. Press the ON/OFF button to turn your Extreme Q 4.0 vaporizer on.  You can press the MENU button to cycle through the multiple available functions.
  2. Once you've selected the desired function, either use the remote control or the UP/DOWN buttons to adjust the temperature setting.
  3. Once the temperature setting has been reached, decide on whether you will use the whip system or the balloon system and continue with your session.
  4. You may refer to the Extreme Q 4.0's manual for more in-depth information on the remote control's functions and whip/balloon bag assembly.

Read more

Da Buddha Vaporizer
April 06, 2016

Da Buddha Vaporizer Information

Information on what's included with Da Buddha Vaporizer. As well as tips & tricks to get the best flavor & clouds from your herb without over-heating it.

Read more

April 06, 2016

Deluxe Daddy Vaporizer Information

Tips and Tricks:

  • The more dry and evenly ground/packed your herb is, the better!
  • Due to the temperature being set by an analog knob, watch for an even, white vapor production upon exhaling.  This will be your best way to figure out where your most preferred heat setting will be.
  • Regularly maintaining your Deluxe Daddy vaporizer will ensure clean and plentiful vapor production each time.

Read more

Vapor Daddy Original Desktop Vaporizer
April 06, 2016

Original Vapor Daddy Vaporizer Information

Getting Started:

  1. After plugging your Original Vapor Daddy vaporizer into a wall outlet, turn the unit on by turning the analog temperature knob to the right until you hear a small click.
  2. Pack dry and evenly ground herb into the opening of your glass wand -- about 2/3 of the way full is the perfect amount.
  3. Gently slide the opened end of your glass wand onto the glass-covered heating element.

Read more

Mighty Portable Vaporizer by Storz & Bickel
April 06, 2016

Mighty Portable Vaporizer Information

Getting Started:

  1. Turn the cooling unit 90 degrees to remove it from the Mighty.  This will expose the filling chamber.
  2. Fill the chamber up to the very top of the plastic rim with dry, shredded herb.
  3. Remount the cooling chamber and turn it back into place.
  4. Swivel the mouthpiece outwards and press the Mighty's main button to turn it on to begin heating.  The Mighty will begin to heat to whatever setting has been entered via its +/- buttons.

Read more

Crafty Portable Vaporizer Information
April 06, 2016

Crafty Portable Vaporizer Information

Getting Started:

  1. Turn the cooling unit 90 degrees to remove it from the Crafty.  This will expose the filling chamber.
  2. Fill the chamber up to the very top of the plastic rim with dry, shredded herb.
  3. Remount the cooling chamber and turn it back into place.

Read more

April 05, 2016

PAX 2 Portable Vaporizer Information

Getting Started:

  1. You can reference the PAX 2's full instruction manual on their website here.
  2. Remove the magnetic oven lid and pack with dry, shredded herb.  Place the oven lid back into position when you're ready to start vaporizing.
  3. To turn the PAX 2 on/off, a short press on the center of the silicone mouthpiece.  The LED display will pulse purple light to indicate that it's heating up.  Once the lights turn green, you're good to go!

Read more

April 05, 2016

Arizer Air Portable Vaporizer Information

Getting Started:

  1. After ensuring your glass stems fit snugly, turn on your Arizer Air by holding down both the UP/DOWN buttons together for two seconds.
  2. UP raises the temperature, DOWN lowers the temperature (yeah, duh).
  3. A Blue flashing LED indicates that your Air is heating up to your desired temperature setting.  A solid blue LED indicates the set temperature has been reached.

Read more

April 04, 2016

Ascent Portable Vaporizer Information

  1. Power on the Ascent vaporizer by pressing the main power button located next to the mouthpiece on the top of the unit.  The front OLED display when turned on.
  2. Open the swivelled bottom chamber towards you to reveal the heating chamber.  Load the chamber with your dry herb or oil jars and close the chamber.

Read more

April 04, 2016

Summit Portable Vaporizer Information

Getting Started:

  1. Open the magnetic herb lid to reveal the heating chamber.
  2. Insert your dried and finely ground herb.
  3. Fill the heating chamber to the top and secure the lid over the chamber.
  4. Press the main button for three seconds to turn the unit on.

Read more

April 04, 2016

QuickDraw 500-DLX Portable Vaporizer Information

Getting Started:

  1. Unlock the QuickDraw 500 by clicking the battery's button three times.
  2. Unscrew any of the vaporizer cartridge's mouthpieces and fill the chamber with your desired material.
  3. Replace the mouthpiece and slide the cartridge into the QuickDraw's upper hollowed casing.  A magnetic base will snap the cartridge into place.

Read more

April 04, 2016

QuickDraw 300-DLX Portable Vaporizer Information

  • ALWAYS ensure the battery is fully charged before first use.
  • For dry herb, the best results will always result from using dry and evenly ground/packed material.
  • For liquid, always ensure that the tank is adequately filled.

Read more

April 01, 2016

Vapor Genie Portable Vaporizer Information

Getting Started:

  1. Remove the top piece to expose the bowl and load with loose, shredded herb.
  2. Screw the top piece back onto the bowl.
  3. Inhale constantly while supplying flame to the flame filter.  The flame should be about 1 inch tall and your toke should be about 6-10 seconds long.
  4. Only allow the TIP of the flame into the hole.

Read more

April 01, 2016

Muad-Dib Concentrate Box Vaporizer Information

Getting Started:

  1. Take a VERY SMALL amount of concentrate and place it in the center of the screen.  The amount should be smaller than the size of the stainless steel ball bearings across the top of the Muad-Dib box.
  2. Close the lid and insert the draw whip into the draw hole.  Insert a fully charged AA battery (included) into the battery hole - positive end first!
  3. Begin your inhale before you engage the battery. 

Read more

January 04, 2016

Best Value Vacs Passive Closed Loop Extractor Systems Information

1lb Passive CLE w/ 15lb LP Tank -- Specifications and What's Included:

  • Specifications:
    • 3" x 18" 304 Stainless Steel Material Tube 1lb (450g)
    • 304 Stainless Steel Heavy Duty Miniature Ball Valves
    • System Rated to 100PSI

Read more

December 21, 2015

Best Value Vacs Specialty Parts Information

1.5" Tri-Clamp x 3" x 1/4" Female NPT -- Specifications:

  • 304 Grade Stainless Steel w/ High Polish interior
  • Fits 1.5" Tri-Clamp
  • 1/4" Female NPT Port
  • 3" Tall

Read more

December 21, 2015

Best Value Vacs Additional Parts Information

90g Closed Loop Extension Kit -- Specifications:

  • 304 Stainless Steel Blast Tube - 90g
  • 304 Stainless Steel Clamp
  • 1.5" Diameter Tube
  • (x1) Nitrile Gasket (solvent compatible and inert material)
  • Dimensions: 12" Long x 1.5" Diameter
  • Weight: 2.3lbs

 

1lb Upgrade Kit for Scalable 90-270g Extractor Kit -- Specifications:

  • Concentric Reducers 3" x 1.5" 
  • (x2) 3" Clamps 
  • (x2) Nitrile Gaskets
  • (x1) 3" Tri-Clamp Top cap
  • (x1) 450 gram Material Column 3" x 18" 
  • (x1) 6" x 6" Open-ended Base Extender 
  • (x1) 6" Clamp 
  • (x1) 6" Nitrile Gasket

 

Pro Set MT69 -- Specifications:

  • Specifications coming soon.  Sorry for the inconvenience!

 

Sight Glass Top Cap Upgrade w/ Compound Gauge and Upgradeable Brass Flare -- Specifications:

  • Pressure Rating: 125PSI
  • Stainless Steel construction
    • With exception of the Flare End Cap for hose-sealing purposes
  • 1/4" NPT fittings
  • 1.5" Tri-Clamp Base Cap
  • NO gaskets/clamps included

 

Closed Loop Extractor Compound Gauge Add-On w/ Valve and Upgradeable Brass Flare -- Specifications:

  • Pressure Range: -30inHg to 150PSI Range
  • Fully Assembled
    • With exception the the bottom stainless thread nipple
  • During install this part will self tighten or can be removed for alternate installation

Read more

December 21, 2015

Best Value Vacs Standard Pressure Clamps Information

Tri-Clamp 1.5" Double Hinge Clamp -- Specifications:

  • 304 Stainless Steel construction
  • Maximum Pressure @ 70°F 500 PSI
  • Maximum Pressure @ 250°F 300PSI

 

Tri-Clamp 2" Single Hinge Clamp -- Specifications:

  • 304 Stainless Steel construction
    • Pressure PSI Rating coming soon!

 

Tri-Clamp 3" Single Hinge Clamp -- Specifications:

  • 304 Stainless Steel construction
  • Maximum Pressure @ 70°F 100 PSI 
  • Maximum Pressure @ 250°F 50PSI

 

Tri-Clamp 4" Single Hinge Clamp -- Specifications:

  • 304 Stainless Steel construction
    • Pressure PSI Rating coming soon! 

 

Tri-Clamp 6" Single Hinge Clamp -- Specifications:

  • 304 Stainless Steel construction
  • Maximum Pressure @ 70°F 350 PSI 
  • Maximum Pressure @ 250°F 175PSI

 

DISCLAIMER:

  • All Stainless Steel Parts bought separately to piece together a Closed Loop, Closed Column, or Open Blast Extractor system DO NOT come with a standard 1 year warranty, customer assistance on how to run your system, technical help or a guarantee of the system being tested.
User assumes all responsibility and risks of their system!

 

Read more